1.Supports the standard 40-channel set: band A, B, E, Fatshark, and Raceband.
2.Compatible with all major FPV receivers from vendors such as Fatshark, ImmersionRC, etc.
Tekko32 F3 Metal ESC Model: Tekko32 F3 Metal
Item Name: 65A BL_32 DShot1200 ESC Quantity: 4 PCS Con. Current: 65A Peak Current: 80A
Input Voltage: 3-6S Lipo Support Ext. cap needed for 6s (220uf 35v for 6s usage.)
F3(M4 Core) MCU, Runs BLHELI32 firmware, the MCU works at 108Mhz
Mosfet tested at 4S 65A, under props, nothing covered for 1min Onboard WS2812B LED
Size: 18 x 27 mm Weight: 4.4g/PC Kakute F7 AIO
Item Name: F7 Flight Controller AIO OSD BEC and Current Sensor MCU: STM32F745 32-bit processor
IMU: ICM20689 (SPI) Barometer: BMP280
Current Sensor: Approximately 130 amps maximum measurable value
USB VCP Driver (all UARTs usable simultaneously; USB does not take up a UART)
6 hardware UARTS (UART1,2,3,4,6,7)
All UARTS support hardware inversion. SBUS, SmartPort, and other inverted protocols work on any UART without "uninvert hack".
Supports serial receivers (SBUS, iBus, Spektrum, Crossfire) only. PPM and PWM receivers are not supported. TF card for Blackbox logging
Dimensions: 35x48x7mm (includes foam-mounted gyro board in height)
Mounting Holes: Standard 30.5mm square to center of holes
Weight: 11g Atlatl HV V2:
Item Name: 5.8G 40CH 25/200/500/800mW FPV Transmitter
Model: Atlatl HV V2 Transmitting Output Power: 25mW/ 200mW/ 500mW/ 800mW Switchable Audio: 6 MHz + 6.5 MHz Mono Antenna Connector: MMCX Input Voltage: 7-28V (2-6S Lipo)
Dimension: 35(L)x 25(W)x 7(H)mm Mounting Hole: 30.5x30.5mm